Stock
How do you do a physical stock count (stock audit) in a shop?
To do a physical stock count, freeze the book quantities at a fixed time, count every shelf and godown on a sheet that does not show the system figure, recount items with large differences, then value each difference at cost and post the approved adjustment. Most shops count costly or fast-moving items monthly and everything else at least once a year.
Seven steps for a stock count that holds up
The same steps work for a kirana store with 400 items, a hardware shop with 4,000, or a pharmacy counting strip by strip.
- Plan the count
- Fix the date and time, split the shop and godown into zones, and give each zone a pair of counters. Decide how goods arriving or leaving during the count will be handled.
- Freeze the book figures
- Take the system quantity for every item at the start time. Everything is compared against this snapshot, not against a figure that keeps moving.
- Tidy and tag
- Put like items together, open loose cartons, and keep damaged and expired stock aside to be counted separately.
- Count blind, in pairs
- Counters write what they find without seeing the system figure. One counts, the other writes, and the unit is checked: box, packet or piece.
- Compare and value
- Set the count against the frozen figure and value each difference at cost. Rupees, not units, show which differences matter.
- Recount the big ones
- Any line beyond your tolerance, say 2% or ₹500, is counted again by a different pair before anything is posted.
- Approve and post
- Someone other than the counter approves the differences, and they are posted as stock adjustments with a note of the count.
Variance from a kirana store count
Three of the store's lines did not match the frozen figures. Valued at cost, the net shortage is ₹850.
| Book / counted | Difference at cost | |
|---|---|---|
| Toor dal 1 kg, cost ₹150 | 120 / 114 | −₹900 |
| Bath soap, cost ₹35 | 300 / 306 | +₹210 |
| Cooking oil 1 litre, cost ₹160 | 48 / 47 | −₹160 |
| Net difference | 3 lines | −₹850 |
How often to count, and the rules that apply
A full count once a year is the minimum. Counting a few items every week, called cycle counting, finds problems while they are still small.
Cycle counting
Count the items with most money in them monthly, the middle group quarterly and the rest once a year. No day-long closure is needed.
Companies and their auditor
Under CARO 2020, the auditor of a company it covers reports whether stock was physically verified at reasonable intervals and how differences of 10% or more in a class of stock were dealt with.
GST on shortages
Stock found lost, stolen or destroyed loses its input tax credit. Section 17(5)(h) of the CGST Act requires the credit taken on it to be reversed.
Find the cause
A shortage repeated on the same items points to billing errors, wrong units, unrecorded returns or theft. Fix the cause, not only the figure.
How Dhaaga runs a stock count
A count is a document in Dhaaga: created, counted, reviewed and approved before a single quantity changes.
A frozen count sheet
Creating a count sheet captures the system quantity of every line at that moment, and lines whose stock moved after the freeze are flagged.
Blind counting
A sheet can be made blind, so counters do not see the system figure while they count.
Variance in rupees
The variance list shows each difference in quantity and value, and lines beyond tolerance can be sent for a recount.
A second person approves
A count beyond tolerance needs approval from someone other than the person who counted it. Posting creates ordinary adjustments that can be reversed.
Which items are due
Each item can carry its own count frequency. Without one, high-value items fall due monthly, middle ones quarterly and the rest yearly.
Questions people ask first.
A stock count is the act of counting. A stock audit is a check, often by an outsider, that the count was done properly and that the books match it.
A count where the counter does not see the quantity the system expects. It stops people from simply agreeing with the screen.
For a full count, closing or counting after hours is simpler. With cycle counting, a few items are counted at a time while the shop stays open.
The shortage, valued at cost, is posted as a stock adjustment, which reduces stock and is charged as a loss. Any input tax credit on the lost goods is reversed.
Each business sets its own. Many accept a small difference on low-value items and recount any difference on costly ones, whatever its size.
Someone who did not count it, usually the owner or the accounts head. The same person counting and approving is not a check.
Put one real day through it.
Not a sandbox with sample data — your own bills, your own items, your own customers. By evening you will know whether this runs your business.
