Garment and textile
The cutting room, the line and the books in one place
Choose the garment or textile pack when you set up the workspace, and Dhaaga adds the documents a stitching unit or a fabric mill works with. Stock, buying, selling, GST, payroll and the books stay the same core every other trade runs on.
Lays, markers and bundles that move the fabric stock
The cutting master’s numbers stop living in a register. A lay draws its cloth out of stock, and what it cut is checked size by size.
- Marker
- Keep a marker library with size ratio, length, width and efficiency, and pick one to fill a lay instead of retyping it.
- Rolls
- Each roll carries colour, shade band, width and GSM. Shade grouping keeps colour and band together, so a mixed lay shows up.
- Lay
- The fabric a lay consumed is issued from stock, so the godown stops counting cloth that is already on the cutting table.
- Variance
- Planned against cut, size by size, and what the lay actually cost.
- Bundles
- Cut pieces become bundles, with tickets printed as A4 coupons or on an 80mm roll.
Pay per operation, not a share of a stage
Collar attach and side seam are different jobs and were never worth the same money. With a routing, a karigar is paid for the operations actually done, at the rate in force that day.
Rates by operation
Set a piece rate for each operation in the routing. A unit without a routing can keep paying by stage.
Dated rate revisions
A revised rate starts from its effective date. Work done before that date is still paid at the old rate.
Job cards per operation
A lot can sit at operation 7 of 22, not just at stitching, with clocked time on every card.
Straight into payroll
Piece earnings land on the month’s salary slip beside salary, overtime and bonus, with PF and ESI worked out on top.
Fabric and finished lots inspected the way buyers ask
Inspections are recorded against the lot and scored by the method the buyer names, so a pass or a fail has its working attached.
| Method | What you get | |
|---|---|---|
| Fabric rolls | 4-point system | Penalty points per 100 square yards against a pass mark you can change, 40 by default |
| Finished lots | AQL sampling, ISO 2859-1 | Sample size and an accept or reject decision from lot size and AQL level |
| On the line | Inline checks | Defects per hundred units, with a defect pareto |
| Needles and metal parts | Needle log | Broken needles and parts recorded, with any not recovered called out |
| Repeat problems | NCR and CAPA | Non-conformance reports, and corrective action with the root cause written down |
From sample to shipment, with job work tracked
The documents around the floor are part of the same record, so a style’s sample, its material and its job work can be read together.
Colour-by-size stock
Every SKU made from one style template shows in a single colour-by-size grid, so the missing size in navy is visible at once.
Material that follows the size mix
BOM lines can scale with size, so the cloth an order needs follows its size breakup rather than an average.
Samples and costing
Sample requests carry fit and measurement checks and a costing sheet for the style.
Time and action plans
Lay out the milestones for an order and get a risk alert a set number of days before one slips.
Job work for wash, print and embroidery
Goods at a job worker stay on your books, the 180-day deemed-supply clock is tracked, and ITC-04 rows are prepared as CSV.
Textile cost heads
Under the textile pack, costing rows use yarn, greige fabric, dyes and chemicals, and processes from warping and weaving to stenter finishing.
Questions people ask first.
No. Dhaaga is a general ERP and POS, and most trades run on the core as it is. The garment and textile packs add the cutting room, bundles and the costing words of those trades on top. Nothing from another trade is forced onto a workspace that did not ask for it.
The garment pack is built around the cutting room and the line: markers, lays, bundles, operation-wise piece rates and AQL. The textile pack is for fabric mills and changes the costing heads to yarn, greige fabric, dyes and mill processes such as warping, weaving, knitting, dyeing and finishing. Stock, buying, quality inspections and the books are the same for both.
Yes. Goods sent out on a job-work challan stay on your books as stock at that vendor until they return. Challans past 180 days are flagged as deemed supply under section 143 of the CGST Act, and the quarter’s ITC-04 rows are prepared as CSV for you to file on the GST portal.
Yes. Piece earnings come onto the same monthly salary slip as fixed salary, overtime and bonus, and PF, ESI and professional tax are computed on the slip. A worker can be on pure piece rate, pure salary or both.
Production and payroll are in the Pro and Enterprise plans, priced per business, and the industry pack for your trade comes on every plan. You can run the whole product free for 7 days, with no card. Current prices for each plan are on the pricing page.
Yes. The item import reads a CSV file, creates or updates items, and can post opening stock in the same pass. On Enterprise the migration from Tally or Excel is done for you.
Put one real day through it.
Not a sandbox with sample data — your own bills, your own items, your own customers. By evening you will know whether this runs your business.
